top of page

Brass gate valve PN 20

Gate valves are designed for fully open or fully closed situation. They are installed in a pipe network as isolation valves and should not be used as control valves. When you want to open the valve, do so counterclockwise and close it clockwise, the stem of the valve then makes an up and down movement on the threaded part.

Gate valves are perfect in arrangements that must ensure minimal pressure loss and full passage. When fully opened, a gate valve has no obstructions in the flow section, resulting in very low pressure loss.

A gate valve is a multi-turn valve, which means that the valve is operated by means of a threaded spindle. Because the spindle must rotate several times to go from an open to a closed position, the slow action also prevents water hammer effects.

Download specifications (pdf).

Brass gate valve PN 20

SKU: 403-01
    • Type: Rub valves S.111
    •  Maximum pressure: 20 Bar
    •  Maximum temperature: 80℃
    •  Minimum temperature: -10℃
    •  Sizes: 1/4'' to 4''
    •  Lever: Red coated steel handwheel.
    •  Connection: inside x inside

     Full bore brass gate valve, fitted on both sides with BSP female thread according to ISO 228. EPDM seals around the stem. All taps have been tested for leak-tightness for at least 24 hours.

    Also available in PN 10

Wat kunnen wij voor u betekenen ?

Related Products